Downloads :
Other Categories :
Details
The XLR panel has a single row of 16, male or female, 3-pin XLR receptacles at the front and is available with a choice of 6.35mm, A-gauge jacks or direct-solder termination at the back. XLR receptacles are PCB-mounting types with a nylon body and female contacts are of a bifurcated design ensuring high contact pressure. Female XLR receptacles are non-latching, but mating female line connectors will latch with the male receptacle. XLR phasing is programed by soldering across 'program pads' on the PCB.
Features
- * 16 inputs and outputs in only 1U of rackspace
- * Direct solder or 1/4" Jack rear termination
- * Suitable for balanced/unbalanced and stereo signals
- * Lacing Bar Kit available for extra rear cable support
- * Neat slide-in strips for socket designation
- * Suitable for insert points without special leads
Specifications:
Front sockets
* CPX16MT / MJ - 1 row of 16 male XLR sockets
* CPX16FT / FJ - 1 row of 16 female XLR sockets
Rear termination
* CPX16FJ / MJ - 1 row of 16, 1/4", 3 pole jacks, A gauge
* CPX16FT / MT - Direct solder connections
Dimensions (W x H x D)(mm)
* CPX16FJ / MJ - 483 x 45 x 68mm
* CPX16FT / MT - 483 x 45 x 60mm
Net weight
* CPX16MJ - 610g
* CPX16FJ - 620g
* CPX16MT - 520g
* CPX16FT - 530g
General
* Switch contact resistance <0.03 Ohm
* Switch contact life >10,000 operations
* Min. rack opening required: 442m
Accessories Included:
* 1pk (10) Ident cards (ICP440)
* 1pk (100) Cable ties (CTP100) (CPX16FT/ MT only)